Skip to product information
1 of 14

Next Audiocom

Next Audiocom 8T6W.A504

Next Audiocom 8T6W.A504

Regular price 11.999,00 zł
Regular price 15.000,00 zł Sale price 11.999,00 zł
Sale Sold out
Tax included. Shipping calculated at checkout.

The choice has never been so simple
Using ready-made offers is the easiest and most advantageous solution. These are properly matched products that guarantee 100% quality and performance. Check if you will find the right set for you
The set consists of:
8X T8W and the A504 DSP amplifier

 T8 IP65 2-way speakers with built-in 100V transformer and tap-in
16 Ω power are perfect for both distributed and
short range in environments such as retail stores, restaurants, terraces
bars, churches, shopping malls or conferences. The speakers are placed in a stylish,
weather-resistant plastic housing (IP65 -
using the back cover) which ensures perfect architectural integration,
both inside and outside. Very accurate speaker coverage allows l

people, among the audience, to perceive sound in the same way. Low frequencies
are reproduced by an 8-inch direct-firing woofer
polypropylene cone, while the high frequency section is based on
titanium tweeter. The set includes a shaped bracket
the letter U, which supports installation on a wall or ceiling.

 U-bracket included
T8 comes with a U-shaped bracket located on the package,
made of hot-dip galvanized steel, which covers the steel with a layer of zinc, making it
it is resistant to corrosion. Other wall brackets are available for the T8 speakers
(with the ability to rotate and tilt).


Versatile installations

T8 speakers are a perfect solution for sounding installations such as shops
retail, restaurants, bar terraces, churches, shopping malls or conferences.


Adjustable bracket
Install the T8 speakers easily by adjusting the wall bracket and positioning them where you want them


Easy connections
T8 speakers are equipped with a 4-position (IN+/IN- and LINK+/LINK-) Phoenix connector
placed on the back wall. Screw connector provides a faster and easier way
system cabling, allowing the speaker to perfectly fit the shape of the wall,
while keeping the cables invisible.


Backplate for IP65
The T8 has a back cover that allows you to expose the speaker to rain or shine
humid environment. Note: The IP65 degree of protection can only be achieved if
the back cover is in place.



Input 100 V / 16 Ω
 The integrated transformer allows the speaker to be used at 100V or low voltage
16Ω impedance depending on the needs of your installation

icon Easy installation
Installation is easy and does not require high technical skills or special tools to install the device.

icon Resistant to weather conditions

IP65 rated housing provides excellent performance in many environments,
including outdoor areas where protection from the elements is required

icon Bracket included
Easily mount the speaker to a wall or ceiling with the included bracket.

icon Version/horizontal and vertical
The speaker can be installed horizontally or vertically, depending on your installation needs

icon Possibility to choose color
The product is available in black and white.

 Technical Specifications
  • Product Type: 2-Way Outdoor Passive Speaker (16 Ω/100V)
  •  Frequency response: (-6 dB)60 Hz - 18 kHz
  •  Dispersion: 90° x vertical 50°
  •  RMS Power:150W/Program:300W
  •  Nominal impedance16 Ω (low impedance mode)
  • Sensitivity (1W, 1m): 94dB
  •  Maximum SPL: 119 dB
  •  Transformer taps 100V: 37.5 W | 75W | 150 W
  •  Low Frequency Speaker: 8 inch woofer
  •  High frequency speaker: 1 inch driver
  •  Connectors: 4-pin screw connector (IN/OUT)
  •  Grill: Acoustically invisible aluminum
  •  Weather-resistant, plastic cabinet
  • IP class: IP65
  •  Dimensions: 240 x 450 x 287 mm
  •  Installation: U-shaped wall bracket
  •  Net weight: 10.7 kg
  •  Shipping weight: 12.2 kg 

The A504DSP combines a lightweight 4 x 500 W (2 x 1000 W) amplifier with a powerful
a DSP processor that can be configured to perform a wide range of tasks,
without the need for additional hardware to support a wide range
loudspeaker systems. Tight integration of processing and amplification allows
the DSP processor to monitor and better adapt to the amplifier's behavior,
making the processing dynamics much more accurate and effective than this
typically achieved with separate components


Maximum flexibility

A504DSP flexibly distributes the total amplifier power in various combinations to four, three or two outputs for control, for example: four full-range speakers or subwoofers, a high-power subwoofer + two full-range speakers, a high-power subwoofer + a bi-amplified speaker or a full-range speaker with high power + high power subwoofer


Neutrik connectors
Designed for professional use, XLR Chassis connectors are manufactured by Neutrik


 Versatile use 
The A504DSP is a cost-effective power amplifier that can be used in both...
route and during installation.



Advanced DSP processor 

Built-in advanced DSP engine, controlled by the built-in OLED screen
with encoder or via PC, with input/output routing, filters
high-pass and low-pass parametric EQ filters,

compressors/limiters, noise gates and equalization delays.


Integrated DSP processor

Integrated DSP controlled by the built-in OLED screen
encoder eliminates the need for external speaker processors.
Everything you need to fine-tune the sound of any speaker is here.


Unique features


Ultra thin design

The ultra-slim design saves space while maintaining the elegant look you need.

icon Minimum impedance 4Ω
To increase the number of speakers connected to a single amplifier channel, you can reduce the amplifier resistance to 4 Ω

icon 100V Line Output
Use this amplifier to flexibly power medium to large 100V line array speaker system setups

icon Matrix
The I/O matrix allows the user to easily route each input audio signal to the desired output port.


icon Matrix
The I/O matrix allows the user to easily route each input audio signal to the desired output port.

icon DSP
 Integrated digital signal processor (DSP) offers the user the ability to easily equalize the sound and adapt it to the needs of the site/installation 

Dedicated presets 
The integrated DSP allows you to have dedicated presets for different situations. You just need to choose which one is most convenient for your application.

 Technical Specifications
  • Product type: Class D amplifier with DSP processor
  •  Frequency response: 20 Hz - 20 kHz (+0 / -1dB)
  •  Amplifier technology: Class D
  •  Number of amplifier channels: 4 channels
  • Amplifier power - Stereo 8Ω: 4x250 W
  •  Amplifier power - Stereo 4Ω: 4x500 W
  •  Amplifier power – bridge 8 Ω: 2x1000 W
  •  Amplifier power - 100V: 2x1000 W
  •  Amplifier gain: 34dB±0.5dB
  •  Speaker output: 4 Ω - 16 Ω | 100V
  •  Damping factor:>180
  •  THD+N:<0.15%
  • SNR (Signal to Noise Ratio)>95dB
  •  Input sensitivity:0.9V - 1.1V (+0 / -1dBv)
  •  Input impedance: Balanced: 20kΩ | Unbalanced: 10 kΩ
  •  DSP technology: 4 inputs x 4 outputs - 32 bit | DSP 192 kHz
  •  Latency:0.66 ms
  •  Adjustable DSP parameters: PEQ, HPF, LPF, HSF, LSF, compressor, gate, level, delay, polarity, mute
  •  Delay adjustment
  • 62.4 ms / 21.42 m per channel
  •  Control type: LCD display | Via USB and supplied software "A504 DSP Controller"
  •  Audio Signal Inputs: Analog audio
  •  Input connectors: 4 x Neutrik XLR
  •  Audio signal outputs
  •  Speaker output connectors: 4 x Neutrik NL4
  • Protections: Full short-circuit, open-circuit protection, thermal, ultrasonic and RF stable under reactive or mismatched loads, on/off, mute, proven crowbar
  •  Operating temperature range: 0°C - 40°C
  •  Cooling type: Fan with controlled speed
  •  Power supply: Switching power supply (SMPS)
  •  Power input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz ±10%
  •  Network connector: IEC socket
  • Power consumption: 1100 W
  •  Armature: rack 1U 19".
  •  Dimensions: 483 x 44 x 290 mm
  •  Net weight: 6 kg
  •  Shipping weight:7.2 kg
View full details